Home Pistolsmithing Shotgunsmithing
Riflesmithing
General Work
|
Description |
Price |
| Minimum Charge per Job (Unless stated otherwise) |
$25.00 |
| Clean & Oil Rifle (Complete DisAssy. & Checking for wear) | $20.00 |
| Bore Sight Rifle | $20.00 |
| Sight In Rifle (Doesn't include cost of ammo or targets) | $40.00 |
| Scope Mounting- Rifle or Scope Purchase from us | N/C |
| Scope Mounting- Brought In | $35.00 |
| Check Headspace | $35.00 |
| Check Firing Pin Protrusion | $10.00 |
| Make Chamber Cast | $35.00 |
| Remove Stuck Case or Bullet from Chamber or Barrel (Price is dependent upon severity of problem). | POR |
| Cut Dovetail in Barrel | $50.00 |
| Drill & Tap Barrel or Receiver for Sights or Scope Base (Per Hole) | $25.00 |
| Install Front Sight Ramp - Sweat-On Type | $50.00 |
| Install Front Sight Ramp - Screw-On Type | $40.00 |
| Install Liner in Barrel | $175.00 |
| Install Pre-Threaded & Chambered Barrel to Action | $120.00 |
| Chamber & Fit Barrel to Action - Std. Caliber's | $170.00 |
| Chamber & Fit Barrel to Action - Win. Pre-64 70 | $200.00 |
| Chamber & Fit Barrel to Action - Wildcat Caliber's | $250.00 |
| Turn & True Receiver Face | $40.00 |
| Turn & True Receiver Locking Lugs & Bolt Locking Lugs | $60.00 |
| Lap Locking Lugs & Bolt Ways to 600 grit polish | $80.00 |
| Crown & Lap Muzzle | $50.00 |
| Thread Muzzle, Contour & Install Muzzle Brake | $90.00 |
| Thread Protector for Muzzle Brake (Contoured to Barrel Dia.) | $50.00 |
| Weld on New Bolt Handle | $85.00 |
| Forge Bolt Handle | $85.00 |
| Install & Adj. Timney/Canjar/Shilen Trigger | $35.00 |
| Install & Adj. Double or Single Set Trigger | $75.00 |
| Install Safety - Mark II / Beuhler Type | $50.00 |
| Install Safety - Win.70 style in bolt shroud | $90.00 |
Metal Finishing
Bluing
Bluing consists of Disassembly, Cleaning, Removing old blue and rust, Polishing, Bluing, Oiling, and Reassembling of gun.
| Description |
Price |
| Matte Finish - Soft or Heavy (Polish out Pitting with 140 polish, Bead Blast) | $125.00 |
| Standard Finish - (Polish out Pitting, Finish with 140 polish) | $125.00 |
| Deluxe Finish - (As above followed with 240 & 400 polish) | $165.00 |
| Master Finish - (As above followed with 500 & 555 polish to a mirror finish) | $200.00 |
| Parkerizing - (Polish out Pitting, Finish with 140 & Bead Blast | $125.00 |
| Baking Lacquer / Teflon-Moly Finish | $165.00 |
Other Finishing
|
Hard Chrome - (Soft Satin Finish for Steel Parts. Matches well with SS) |
175.00 |
| Case Coloring - (Price depending on number of pieces) | POR |
| Stainless Steel Finishing - Matte | $75.00 |
| Stainless Steel Finishing - Deluxe | $100.00 |
| Stainless Steel Finishing - Master | $165.00 |
| Strip Nickel Finish | $125.00 |
| Draw Filing | Hr./Rate |
| Jewel Bolt | $75.00 |
| Jewel Follower | $50.00 |
Stock Finishes include stripping the old finish, sanding to 400 grit, raising the grain between grits, and sealing the stock.
|
Description |
Price |
| Standard Stock Finish - (Unfilled oil, Satin) | $125.00 |
| Deluxe Stock Finnish - (Filled, Hand Rubbed Oil in Satin or Gloss) | $175.00 |
| Spray Lacquer or Polyurethane- (Gloss) | $125.00 |
| Black Wrinkle Paint Finish | $125.00 |
| Glass Bed and Free Float Barrel - (Std. Hunting Rifle) | $100.00 |
| Glass Bed and Free Float Barrel - (Benchrest & Match Rifles, etc) | $150.00 |
| Pillar Bed and Free Float Barrel | $150.00 |
| Inletting Semi-Finished Stock | $200.00 |
| Pre-Finished Syn. Stock - (Fit & Install Bbl'd. Action) | $125.00 |
| Install Recoil Pad | $40.00 |
| Install Adj. Butt Plate | $90.00 |
| Install Sling Swivel Studs | $35.00 |
| Install Stock Cross Bolt | $50.00 |
| Recut Checkering - (Per Panel) | $75.00 |
| Checkering - (By the Hour, Priced by complexity of pattern) | POR |
Because of unforeseen complications, many prices could be higher than those shown.