|
Description |
Price |
| Minimum Charge per Job (Unless
stated otherwise) |
$25.00 |
| Clean
& Oil Customer Gun - (Complete DisAssy. & Check for
wear). |
$20.00 |
| Sight
In Customer Gun - (Does Not Include Ammo or
Targets) |
$40.00 |
| Drill
& Tap for Scope Mount - (Per
Hole) |
$20.00 |
| BoMar
BMCS/Millett/Wichita Machined into Slide |
$120.00 |
| BoMar
BMCS Machined Melted into Slide |
$175.00 |
| Silver
Solder Front Sight |
$50.00 |
| Dovetail Cut for Front
Sight |
$60.00 |
| Stake
in Front Sight |
$35.00 |
| Extractor Tuned and
Polished |
$35.00 |
| Lower
and Flare Ejection Port |
$75.00 |
| Throat
& Polish Feed Ramp |
$60.00 |
| Tighten Slide to
Frame |
$100.00 |
| Accu-Rail Slide &
Frame |
$250.00 |
| Fit
N.M. Barrel & Bushing -
(Non-Ramped) |
$125.00 |
| Fit
N.M. Barrel & Bushing -
(Ramped) |
$175.00 |
| Fit
Match Bushing to Slide & Barrel |
$45.00 |
| Fit
Match Trigger |
$35.00 |
| Trigger Job Standard 3.5 lb.Pull
- (Series 70) |
$75.00 |
| Trigger Job Competition 2 lb.Pull -
(Series 70) |
$95.00 |
| Trigger Job Standard 3.5 lb.Pull -
(Series 80) |
$90.00 |
| Trigger Job Competition 2.5 lb.Pull -
(Series 80) |
$110.00 |
| Install Ambidextrous
Safety |
$75.00 |
| Install Extended
Safety |
$50.00 |
| Bevel
Magazine Well |
$65.00 |
| Cut
Frame & Weld in Maxi Well |
$150.00 |
| Install Extended
Ejector |
$20.00 |
| Machine Frame for Beavertail Grip
Safety |
$100.00 |
| Machine Slide for Hybrid
Barrel |
$65.00 |
| Install Bushing Compensator-
Add to Barrel Fitting Price (Does Not Include
Machining Slide & Comp or
Bluing) |
$125.00 |
| Install Cone Compensator - Add to
Barrel Fitting Price (Does Not Include machine Slide &
Comp or Bluing) |
$150.00 |